30SQT0642 (ENG)≥ Confirm Encryption key (Password) of the selected wireless access point if the networkauthentication is encrypted.1 Press Wi-Fi button on this unit.2 Touch [Wi-Fi Setup] and select [Set Wireless Access Point].3 Touch the part with no display of a wirelessaccess point.4 Touch [Search].5 Touch the wireless access point to connect.≥ If you touch [Refresh], you can search for wireless access points again.≥ If you touch and select a wireless access point, all characters will be displayed. In thiscase, touch [OK].≥ If no wireless access points are displayed, refer to “Setting up a connection manually” in theOperating Instructions (PDF format).≥ If an Encryption key (Password) is not set, the connection is complete and a message isdisplayed. Touch [EXIT] to exit [Set Wireless Access Point], and proceed to Step 7.6 (When there is an Encryption key (Password))Enter the Password.≥ For information on how to enter characters, refer to the Operating Instructions (PDF format).≥ When the entry is complete, touch [Enter].≥ The connection will be completed and a message will be displayed. Touch [EXIT], and exit [SetWireless Access Point]7 Connect the smartphone to a wireless access point.8 Touch [Remote Ctrl] and start up the smartphone application “Image App”.≥ When the connection is complete, images of this unit is displayed on the smartphone screen.≥ When this unit is connected to a wireless access point, you can also use NFC to remotely operatethis unit with the smartphone via the wireless access point. For details, refer to “Using [RemoteCtrl] with a wireless access point connection” in the Operating Instructions (PDF format).Searching for wireless access points to set up a connectionA [Delete]B [EXIT]