Panasonic HC-WX970 Owner's Manual

Also see for HC-V770M: Operating instructions Basic operating instructions Operating instructions Operating instructions Operating instructions

Panasonic HC-WX970 Owner's Manual Manual pdf 32 page image

32SQT0650 (ENG)Using [Link to Cell] with a wireless access pointconnectionCheck if the wireless access point you are using is compatible with WPSj If the wireless access point is compatible with WPS:Proceed to the following [WPS Connection]j If the wireless access point is not compatible with WPS:“Searching for wireless access points to set up a connection” (l 33)1 Press Wi-Fi button on this unit.2 Touch [Wi-Fi Setup] and select [Wireless Settings].3 Touch the part with no display of a wirelessaccess point.4 Touch [WPS Connection].5 Set the wireless access point to waiting for WPS.≥ For further details, please read the operating instructions for thewireless access point. (When using a tethering connection, pleaseread the operating instructions for the smartphone.)≥ A message is displayed when the connection is complete. Touch[ENTER], and exit [Wireless Settings]≥ A message is displayed when the connection attempt fails. Touch[ENTER], and set the connection again.6 Connect the smartphone to a wireless access point.7 Touch [Link to Cell] and start up the smartphone application “Image App”.≥ When the connection is complete, images of this unit is displayed on the smartphone screen.≥ For information on how to set a PIN code, refer to the Owner’s Manual (PDF format).≥ When this unit is connected to a wireless access point, you can also use NFC to remotely operatethis unit with the smartphone via the wireless access point. For details, refer to “Using [Link toCell] with a wireless access point connection” in the Owner’s Manual (PDF format).[WPS Connection]A [Delete]B [ENTER]