- 105 -∫ To display the on-screen information on the TV/ /When the EXT DISPLAY button on the remote control is pressed, theinformation displayed on the screen (operation icon and time code etc.)can be displayed/not displayed on the TV.≥ It will not display when the unit is turned off.When the menu setting is changed, the information displayed on the screen (operation iconand time code etc.) can be displayed/not displayed on the TV.* This setting is only available in recording mode.Connecting with a HDMI mini cableSelect the desired method of HDMI output.≥ [AUTO] determines the output resolution automatically based on information from theconnected TV.If the images are not output on the TV when the setting is [AUTO], switch to the method[1080p], [1080i] or [576p] which enables the images to be displayed on your TV. (Pleaseread the operating instructions for the TV.)≥ Image will not display on TV for a few seconds in the following cases.j When the 1080/50p recording mode is turned on/off during Motion Picture Recording Modej When you touch the play mode select icon to select [1080/50p], and then touch [ENTER]during Playback Modej When the play mode select icon is set to in the Playback Mode, and it is switchedbetween the 3D still picture and the 2D still picturej When the 1080/50p, 1080/50i, AVCHD 3D or Side-by-side scenes are switched: [SETUP] # [EXT. DISPLAY] # desired setting[SIMPLE]*: Information partially displayed[DETAIL]: All information displayed[OFF]: Not displayedRefer to the following support site for information about the Panasonic TVs that youcan directly insert an SD card into the SD card slot on the TV and then play it back.http://panasonic.net/≥ It may not be possible to play back scenes on the TV depending on the recording format.≥ For details on how to play back, please read the operating instructions for the TV.: [SETUP] # [HDMI RESOLUTION] # [AUTO]/[1080p]/[1080i]/[576p]SEARCHSTILL ADV STILL ADVSEARCH/VOLDATE/TIMESTOPEXT DISPLAYPLAYSTOPSKIP SKIPPAUSEHC-X900 HC-X909 HC-X900MHC-X800MENUMENU
