61VQT1U19When recording, the input level from the built-in microphones and the external microphone terminal canbe adjusted.! Set the AUTO/MANUAL switch to MANUAL. ( 59)1 Select the menu. ( 24)! Set to [AUTO] to return to normal setting.[AUTO]:AGC is activated, and the recording level isadjusted automatically.[SET( ]:The desired recording level can be set. AGC willalso be activated to reduce the amount of sounddistortion.[SET]:AGC is not activated and so natural recordingcan be performed.AGC: Auto Gain Control2 Move the cursor button to adjustthe microphone input level.Centre! Front left" Back left# Front right$ Back right% Microphone input level! A gain value for each of the 5 built-inmicrophones is displayed. (The input level ofthe microphones cannot be set individually.)! Adjust the microphone input level so that thelast 2 bars of the gain value are not red.(Otherwise, the sound is distorted.) Select alower setting for microphone input level.3 Press the cursor button to setand then press the MENU buttonto finish the setting.& Microphone input level meter! When the AUTO/MANUAL switch is set toAUTO, [MIC LEVEL] is set to [AUTO].! When [MIC SETUP] is [ZOOM MIC], thevolume will be different depending on the zoomrate. Set [MIC SETUP] to [SURROUND]( 54) or set the microphone input level afteradjusting the zoom rate.! Audio becomes stereo (2 ch) when input isfrom an external microphone, and the front leftand front right gain values only work.! The microphone input level meter shows thelargest volume for the microphones.! You cannot record with the audio completelymuted.Microphone level[RECORD SETUP] ![MIC LEVEL][SET( ] or [SET]MENU
