59VQT1Y00RecordingRecording (Basic)6 AF trackingIt is possible to set the focus and exposure to the subject specified on the touch screen.The focus and exposure will keep following the subject automatically even if it moves. (Dynamic tracking)¬ Change the mode to .1 Touch .A Target frame≥ will be displayed on the screen.≥ The target frame will track the face framedin prioritized face framing (orange) whenthe Intelligent auto mode is set to(portrait).≥ Available target lock range will be displayedin red frame when the Intelligent auto modeis set to anything but (portrait).2 Touch the object and lock the target.≥ When you touch the head of the object, thetarget frame on the head gets locked andtracking starts.≥ Touch the object to be changed againwhen you want to change the target.≥ When the Intelligent auto mode is selected,the setting becomes (normal) andtouched object is tracked. Selectionbecomes (portrait) when target frameis locked on a face.3 Start recording.≥ When you touch [RETURN], the trackingfunction will be canceled.∫ About target frame≥ When the button is pressed halfway, thefocus is set to the object that is locked. Thetarget frame turns green when it focuses, andthe target cannot be changed.≥ When target lock fails, the target frame blinksin red and then disappears. In such cases,touch the object again and lock the target.≥ The frame out assist B is displayed when thetarget frame gets close to framing out.≥ This function cannot be used in Manual mode.≥ It may track different objects or may not lockthe target depending on the recordingconditions such as the following:jWhen the object is too large or too smalljWhen color of the object is similar to thebackgroundjWhen using zoomjWhen the camera is shakingjWhen more than one object overlapsjWhen the scene is darkjWhen the subject moves quickly≥ A message will be displayed when an objectbecomes unable to be tracked half-way through.In such cases, touch the object one more time.≥ AF tracking will be canceled in the following cases.jWhen the mode is changedjWhen the power is turned offjWhen the Scene mode is setjWhen the Intelligent auto mode is set to on/off≥ After setting [DISPLAY] to [OFF] if no operationis performed for about 3 seconds, theoperation icon disappears. Touch the screen todisplay the icon again. When the AF tracking isused, the icon does not disappear.
