127VQT1Y31OthersIndications2 MessagesMajor confirmation/error messages to be indicated on the screen in text.RECOMMEND DATA BACK UP PERIODICALLY.We recommend backing up important recorded motion pictures and still pictures periodically to aPC, DVD disc etc. to protect it. This message does not indicate that there is a problem with this unit.HDD BACKUP RECOMMENDED.There is a possible problem with the HDD. Copy the motion pictures and still pictures stored on theHDD to a PC or a DVD disc immediately (l 100, 111), and detach the power and contact consumersupport. (l 149, 150).HDD ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.Access to HDD failed. Turn on the power again. Make sure not to give a strong shock or impact to the unit.CANNOT OPERATE DUE TO LOW TEMPERATURE.The internal temperature of this unit is extremely low so it cannot be operated.If “Please Wait.” appears after this message, wait a while without turning the unit off. It may taketime until the unit can be used.CHECK CARD.This card is not compatible or it cannot be recognized by the unit.If this message appears even though motion pictures and still pictures are recorded on an SD card,the card may be unstable. Reinsert the SD card, then turn the power off and then on again.THIS BATTERY CANNOT BE USED.≥ Use a battery that is compatible with this unit. (l 20)If using a Panasonic battery compatible with this unit, remove the battery and then insert it again.If the message appears even after repeating this several times, this unit needs repair. Detach thepower and contact consumer support. (l 149, 150) Do not attempt to repair it by yourself.≥ You are attempting to connect an AC adaptor not compatible with this unit. Use the supplied ACadaptor. (l 23)CANNOT CHECK CONNECTED DEVICE. DISCONNECT THE USB CABLE FROM THIS UNIT.≥ The DVD burner is not correctly connected.Disconnect and then reconnect the Mini AB USB Connection Cable.≥ Connect a DVD burner that is compatible with this unit. (l 100)PLEASE CHECK EXTERNAL DRIVE OR DISC.A disc that cannot be used when connecting the unit to the DVD burner has been inserted, or theDVD burner is not recognized properly. Connect the Mini AB USB Connection Cable again andinsert a disc to copy the data. (l 100)DISCONNECT USB CABLE.The unit cannot correctly establish the connection to the PC or printer. Disconnect and thenreconnect the USB cable.
