Panasonic HDC-HS300P Service Manual

Panasonic HDC-HS300P Service Manual Manual pdf 23 page image

236 Service Mode1. Indication method of the service menuSet the mode dial “Motion Picture Recording” mode.2. While keep pressing the “Intelligent auto” button, “Manual focus” button and “Menu” button for more than 3 seconds until thetop screen of the Service Mode Menu being displayed.Service mode menuNOTE:Do not using service mode except above table of Service Menu.3. End method of the top screen of the service menuPush the menu button to end the service mode, and then POWER OFF.Screen display Contents Function1 Factory settings Function to throw a product up in a factory shipment state(When recorded data in HDD, “error display” is done)2 Drive information display Fall detection frequency of HDD, Frequency that exceeds high-est/lowest operation guarantee temperature and serial numberdisplay3 HDD self check execution Function to check self as for the state of HDD4 Lock search history indication Display an error cord for three histories saved in EEPROM5 Power ON self check result display Power ON self check (function to diagnose correct function ofthe device and interface between devices) result display6 HDD hardware test Function to confirm state of HDD hardware