Panasonic HDC-HS80P Owner's Manual

Also see for HDC-HS80P: Owner's manual Service manual Owner's manual Owner's manual

Panasonic HDC-HS80P Owner's Manual Manual pdf 124 page image

Whenabout5minuteshavepassedwithoutanyoperation,thisunitautomaticallyturnsofftosavebatterylife.• The Power Save function will not activate when:connected to AC adaptorusing the USB cable for PC, DVD burner etc.PRE-REC is usedThe unit is put into recording pause approx. 1 second when the unit is turned on with themode set to _ or O.• Depending on the recording conditions, start time may be longer than 1 second.• In the Quick power on mode, the zoom magnification becomes 1 ×.This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened.• When in Quick start standby mode about 80% of the power used in Recording pausemode is being consumed, so the recording time will be reduced,• [ HDC-SD80 }Quick start will not work if there is no SD card inserted.• [ HDC-TM80 }/_Quick start will not work if the [SD CARD] is selected in the [MEDIA SELECT], even if thereis no SD card inserted.• Change the mode to _ or O.1 Set [QUICK START] to [ON].2 Close the LCD monitor while the mode isset to _ or O.The status indicator O flashes green and the unitgoes into Quick start standby mode.3 Open the LCD monitor.The status indicator O lights red and the unit is putinto recording pause.• Quick Start Standby Mode is canceled ifabout 5 minutes have elapsedmode is set to []• Depending on the recording conditions and menu settings, time for Quick start may belonger than 0.6 seconds.• It may take some time for Automatic white balance to adjust.• In the Quick Start Mode, the zoom magnification becomes 1 ×.44VQT3J15