87VQT3K694 Touch [EXIT] to end the adjustment.≥ After adjustment, a single screen appears.≥ When re-attaching the 3D Conversion Lens orafter an impact etc., it is recommended that youperform the adjustment again.5 Press the recording start/stop button tostart recording.≥ Start recording after removing the Lens front cap.≥ When the 3D Conversion Lens is attached, the zoom position is fixed, and the zoomoperation is disabled.≥ When recording in 3D, the image will appear with gray frame around it. The gray frame willbe recorded in the video.≥ Use of a tripod is recommended for recording with a stable picture.≥ The reception range for the remote control might become narrow at the upper side of theunit, so operate from the lower side. (l 54)≥ [ECONOMY] will not work while you adjust the 3D Conversion Lens attachment position.≥ When the 3D Conversion Lens is attached, the auto slow shutter setting is [AUTO SLOWSHTR (3D)]. The default setting of [AUTO SLOW SHTR (3D)] is [ON]. (l 73)≥ While 3D recording if moving the unit fast, the message is more likely to appear.≥ If the unit is turned on with the lens cap attached in the shade etc., the screen may appearto be blue. In such a case, remove the lens cap to return the screen to normal.To ensure that the 3D video can be safely viewed, pay attention to the followingpoints when recording.≥ Where possible, record with the unit in a horizontal state.≥ Do not get too close to the subject. (record from a distance of at least 1.2 m (3.9 feet).)≥ When moving the unit as you record, move it slowly.≥ Try to hold the unit as steady as possible when recording while riding in a vehicle orwalking.3D 0h00m00s0h00m00s0h00m00sR 1h20mR 1h20mR 1h20mHGA appears.3D
