34VQT2H52PreparationSetup7 Setting date and timeWhen the unit is turned on for the first time, a message asking you to set the date and time will appear.Select [YES] and perform steps 2 to 3 below to set the date and time.¬ Change the mode to .1 Select the menu. (l 29)2 Touch the date or time to be set,then set the desired value using/ .≥ The year will change as follows:2000, 2001, ..., 2039, 2000, ...≥ The 12-hour system is used to display the time.≥ appears on the right top of the screenwhen [SET WORLD TIME] (l 35) is set to[HOME], while appears when it is set to[DESTINATION].3 Touch [ENTER].≥ The clock function starts at [00] seconds.≥ A message prompting for World time settingmay be displayed. Perform the World timesetting by touching the screen. (l 35)≥ Touch [EXIT] or press the MENU button tocomplete the setting.Changing the date and time display modeSelect the menu. (l 29)[SETUP] # [DATE/TIME] # desired displaystyle≥ The date and time disappear from the screenafter being displayed for a few seconds.Changing the date formatSelect the menu. (l 29)[SETUP] # [DATE FORMAT] # desireddisplay style≥ The date and time function is driven by a built-in lithium battery.≥ If the time display becomes [- -], the built-inlithium battery needs to be charged. Torecharge the built-in lithium battery, connectthe AC adaptor or attach the battery to thisunit. Leave the unit as it is for approx. 24 hoursand the battery will maintain the date and timefor approx. 6 months. (The battery is still beingrecharged even if the power is off.)[SETUP] # [CLOCK SET] # [YES][DATE] [D/T][OFF]Display style Screen display[Y/M/D] 2009. 11. 15[M/D/Y] NOV 15 2009[D/M/Y] 15. 11. 200912:34PMNOV 15 2009NOV 15 2009
