72VQT3J95Dividing a scene to partially delete (iFrame)Divide the iFrame scene, and delete unnecessary parts.This divides the recorded scenes in two and deletes the front half or back half.The scenes that were deleted after division cannot be recovered.≥ Change the mode to , and set [VIDEO/PICTURE] of the play mode selection to[iFrame]. (l 36)1 Select the menu.2 Select the scene you wish to divide using the cursor button andpress the ENTER button.3 Select to set the dividing point.≥ Using slow-motion playback or frame-by-frameplayback makes it easy to search for the pointwhere you want to divide the scene. (l 63)≥ Set to at least 2 seconds for the portions to bedeleted and least 3 seconds for the portion thatis to remain.4 Select the part for deletion, thenpress the ENTER button.5 Select [YES] and press the ENTERbutton to confirm (play back) thepart for deletion.≥ A confirmation message appears when [NO] is selected.Proceed to step 7.6 Stop the playback.≥ A confirmation message appears.7 Select [YES] and press the ENTER button.≥ To continue dividing and deleting other scenes, repeat steps 2-7.To complete dividing≥ Press the MENU button.≥ It may not be possible to divide scenes with a short recording time.≥ The actual division may slightly slip off the previously designated dividing point.: [EDIT SCENE] # [SPLIT&DELETE ]0h00m15s0h00m15s0h00m15s
