11(ENG) VQT2U80PreparationSetup1 Power supply∫ About batteries that you can use with this unitThe battery that can be used with this unit is VW-VBG130/VW-VBG260/VW-VBG6.≥ The unit has a function for distinguishing batteries which can be used safely. Thededicated battery (VW-VBG130/VW-VBG260/VW-VBG6) supports this function. Theonly batteries suitable for use with this unit are genuine Panasonic products andbatteries manufactured by other companies and certified by Panasonic. (Batterieswhich do not support this function cannot be used). Panasonic cannot in any wayguarantee the quality, performance or safety of batteries which have beenmanufactured by other companies and are not genuine Panasonic products.≥ To use the VW-VBG6 for this unit, the battery pack holder kit VW-VH04 (optional) is required.Important:If the DC cable is connected to the AC adaptor, then the battery will not charge.Remove the DC cable from the AC adaptor.1 Connect the AC cable to the AC adaptor and the AC outlet.2 Insert the battery into the AC adaptor by aligning the arrows.It has been found that counterfeit battery packs which look very similar to the genuineproduct are made available to purchase in some markets. Some of these battery packs arenot adequately protected with internal protection to meet the requirements of appropriatesafety standards. There is a possibility that these battery packs may lead to fire or explosion.Please be advised that we are not liable for any accident or failure occurring as a result ofuse of a counterfeit battery pack. To ensure that safe products are used we wouldrecommend that a genuine Panasonic battery pack is used.Charging the batteryWhen this unit is purchased, the battery is not charged. Charge the battery beforeusing this unit.Charging lamp [CHARGE] ALights up:Charging (Battery charging time: l 13)Goes off:Charging completedFlashing:Be sure to connect the unit correctly