2VQT3J27 (ENG)∫ Concerning the batteryFor Australia and New ZealandIF THE POWER CORD OF THISEQUIPMENT IS DAMAGED, IT MUST BEREPLACED WITH AN ELECTRICALLYAPPROVED POWER CORD.Use only the recommended accessories.≥ Always use a genuine Panasonic HDMImini cable (RP-CDHM15, RP-CDHM30;optional).∫ Product identification markingInformation for Your SafetyWARNING:TO REDUCE THE RISK OF FIRE,ELECTRIC SHOCK OR PRODUCTDAMAGE,≥ DO NOT EXPOSE THIS APPARATUSTO RAIN, MOISTURE, DRIPPING ORSPLASHING AND THAT NOOBJECTS FILLED WITH LIQUIDS,SUCH AS VASES, SHALL BEPLACED ON THE APPARATUS.≥ USE ONLY THE RECOMMENDEDACCESSORIES.≥ DO NOT REMOVE THE COVER (ORBACK); THERE ARE NO USERSERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIEDSERVICE PERSONNEL.CAUTION!≥ DO NOT INSTALL OR PLACE THISUNIT IN A BOOKCASE, BUILT-INCABINET OR IN ANOTHERCONFINED SPACE. ENSURE THEUNIT IS WELL VENTILATED. TOPREVENT RISK OF ELECTRICSHOCK OR FIRE HAZARD DUE TOOVERHEATING, ENSURE THATCURTAINS AND ANY OTHERMATERIALS DO NOT OBSTRUCTTHE VENTILATION VENTS.≥ DO NOT OBSTRUCT THE UNIT’SVENTILATION OPENINGS WITHNEWSPAPERS, TABLECLOTHS,CURTAINS, AND SIMILAR ITEMS.≥ DO NOT PLACE SOURCES OFNAKED FLAMES, SUCH ASLIGHTED CANDLES, ON THE UNIT.≥ DISPOSE OF BATTERIES IN ANENVIRONMENTALLY FRIENDLYMANNER.The socket outlet shall be installed nearthe equipment and easily accessible.The mains plug of the power supply cordshall remain readily operable.To completely disconnect this apparatusfrom the AC Mains, disconnect the powersupply cord plug from AC receptacle.WarningRisk of fire, explosion and burns. Do notdisassemble, heat above 60 oC orincinerate.CAUTIONDanger of explosion if battery isincorrectly replaced. Replace only withthe same or equivalent typerecommended by the manufacturer.Dispose of used batteries according tothe manufacturer’s instructions.Product LocationHigh DefinitionVideo CameraBattery holderAC adaptor Bottom