36VQT3J17When about 5 minutes have passed without any operation, this unit automatically turns off tosave battery life.≥ The Power Save function will not activate when:j connected to AC adaptorj using the USB cable for PC, DVD burner etc.j PRE-REC is usedThe unit is put into recording pause approx. 1 second when the unit is turned on with themode set to or .≥ Depending on the recording conditions, start time may be longer than 1 second.≥ In the Quick power on mode, the zoom magnification becomes 1k.This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened.≥ When in Quick start standby mode about 80% of the power used in Recording pausemode is being consumed, so the recording time will be reduced.≥Quick start will not work if there is no SD card inserted.≥ /Quick start will not work if the [SD CARD] is selected in the [MEDIA SELECT], even if thereis no SD card inserted.≥ Change the mode to or .1 Set [ QUICK START ] to [ON ].2 Close the LCD monitor while the mode isset to or .The status indicator A flashes green and the unitgoes into Quick start standby mode.3 Open the LCD monitor.The status indicator A lights red and the unit is putinto recording pause.≥ Quick Start Standby Mode is canceled ifj about 5 minutes have elapsedj mode is set to≥ Depending on the recording conditions and menu settings, time for Quick start may belonger than 0.6 seconds.≥ It may take some time for Automatic white balance to adjust.≥ In the Quick Start Mode, the zoom magnification becomes 1k.[ECONOMY] [OFF]/[5 MINUTES][QUICK POWER ON] [OFF]/[ON][QUICK START] [OFF]/[ON]
