48VQT3J15The used space and remaining recordable time of the SD card, built-in memory and HDD canbe checked. Touching [CHANGE MEDIA] switches the unit between the display for the SD card and thedisplay for the built-in memory/HDD. When the mode switch is set to , remaining recordable time for the selected recordingmode is displayed. Touch [EXIT] to close the indication. The SD card, built-in memory or built-in HDD requires some space to store information andmanage system files, so the actual usable space is slightly less than the indicated value.The usable built-in memory/HDD space is generally calculated as 1 GB=1,000,000,000bytes. The capacities of this unit, PCs and software are expressed as1 GB=1,0241,0241,024=1,073,741,824 bytes. Therefore, the indicated value of thecapacity appears to be smaller.Perform the touch screen calibration if a different object to the one touched is selected.1 Touch [ CALIBRATION ]. Touch [ENTER].2 Touch the [] that appears on the screen with the supplied stylus pen. Touch [] in sequence (up left down left down right up right center).3 Touch [ENTER].This item is used to start the unit demonstration.(Only when the mode is at the or position)If [DEMO MODE] is switched to [ON] and you touch [EXIT] when there is no SD card insertedand while this unit is connected to the AC adaptor, the demonstration automatically starts.If any operation takes place, the demonstration is canceled. However if no operations takeplace for approx. 10 minutes, the demonstration automatically starts again. To stop thedemonstration, set [DEMO MODE] to [OFF] or insert an SD card.This item is used to start the Optical Image Stabilizer demo.(Only when the mode is at the position)Touch [O.I.S. DEMO], the demonstration automatically starts.When you touch [EXIT], the demonstration will be canceled.You can select the language on the screen display and the menu screen./[MEDIA STATUS][CALIBRATION][DEMO MODE] [OFF]/[ON][O.I.S. DEMO][LANGUAGE]
