55VQT3J56≥ After setting PRE-REC, if recording starts in less than 3 seconds, or while the PRE-RECindication flashes within about 3 seconds after initiating the Quick start operation, motionpictures taken 3 seconds before pressing the recording start/stop button cannot be recorded.≥ Images displayed on the thumbnail in Playback Mode will differ from the motion picturesdisplayed at the start of playback.When a smiling face is detected during motion picture recording, the unitautomatically records a still picture.The icon changes each time it is touched.([ON]) # ([FACE RECOG.]) # [OFF]: The unit records a still picture on detecting a smiling face.: Still pictures are only recorded when the face of a person registered using FaceRecognition (l 61 ) is detected.[OFF]: Cancel the setting.≥ During Smile Shot recording, the face detected as a smiling face is surrounded by a greenframe and / are red.≥ Smile Shot recording will not work in the following cases. ( / will flash)jWhen there is no SD card insertedjWhen it is set to [PICTURE/SD CARD] in [MEDIA SELECT], and there is no SD cardinsertedj When it is set to Manual Focusj When [FACE RECOG.] is set to [OFF], or no one is registered (In ([FACE RECOG.]) only)≥ Depending on the recording conditions (type of smile, camera shake, etc.), the face of thesubject may not be detected correctly.≥ The number of recording pixels are (2816k1584) or (1920k1080). (l 69)≥ When still pictures that have been recorded using the Smile Shot are displayed asthumbnails, the appears.≥ When the AF/AE tracking function is target locking a face of the subject, still pictures areonly recorded if a smiling face is detected on the locked subject. When the Smile Shotfunction is set to ([FACE RECOG.]), it will record only if the face of a subject registeredwith [FACE RECOG.] is locked as a target.When the button is pressed, the flash is activated and the picture will berecorded. Use the Built-in flash in order to record still pictures in dark places.Each time the ß icon is selected, the indication changes by one setting in the following order:ß ([ON]) # ßA ([AUTO]) # ([OFF])≥ The unit automatically determines if the flash is necessary even when it has been set toby detecting the ambient brightness. (If it determines that the flash is necessary, theindication lights up in red.)Smile shotBuilt-in flashHDC-SD90HDC-TM90M4.5 2.1 M
