35(ENG) VQT3B26≥ Use of a tripod is recommended for recording with a stable picture.≥ The reception range for the remote control might become narrow at the upper side of theunit, so operate from the lower side.≥ You will hear a sound when the unit is moved rapidly with the 3D Conversion Lensattached, but this is not a malfunction.≥ When the adjustment dial is rotated too much, you will hear a “clapping” sound and theadjustment screen will stop moving. In such a case, rotate the adjustment dial in theopposite direction until the adjustment screen starts moving.≥ [ECONOMY] will not work while you adjust the 3D Conversion Lens attachment position.≥ When the 3D Conversion Lens is attached, the auto slow shutter setting is [AUTO SLOWSHTR (3D)]. The default setting of [AUTO SLOW SHTR (3D)] is [ON].≥ While 3D recording if moving the unit fast, the message is more likely to appear.∫ Removing the 3D Conversion LensRotate the attachment screw to UNLOCK to loosenand then remove.≥ Place the unit on a stable location such as a table,and be careful not to drop the 3D ConversionLens.≥ Be careful not to lose the lens caps.≥ When storing, always fit the lens caps to avoid scratching the protective glass.∫ Functions that cannot be used during 3D recordingWhen recording with the 3D Conversion Lens, you cannot use certain functions.*1 The zoom position is fixed, and the zoom operation is disabled.*2 The normal optical image stabilizer and optical image stabilizer lock can beused.Functions not available during 3D recording(Button/lever operations)j Zoom in/out function *1j HYBRID O.I.S. *2j Intelligent auto modej AF/AE trackingj 1080/50p recordingj Still picture recording (still picture recording mode, and still picture recording in motionpicture recording mode)j Manual operations (focus, shutter speed, iris)j [EXT DISPLAY] (remote control)UNLOCKUNLOCK