23VQT2B34Caution:When the SD card is removed while the access lamp is lit, this unit may malfunction or the datarecorded on the SD card may be lost.1 Open the LCD monitor.≥ Check that the access lamp has gone off.2 Open the SD card cover bysliding the OPEN lever B.3 Insert/remove the SD card.≥ Face the label side C in the direction shown inthe illustration and press it straight in as far asit will go.≥ Press the centre of the SD card and then pull itstraight out.4 Securely close the SD card cover.≥ Securely close it until it clicks.≥ Do not touch the terminals on the back of the SD card.≥ Do not apply strong shocks, bend, or drop the SD card.≥ Electrical noise, static electricity or the failure of this unit or the SD card may damage or erase thedata stored on the SD card.≥ When the card access lamp is lit, do not:jRemove the SD cardjTurn the unit offjInsert and remove the USB cablejExpose the unit to vibrations or shockPerforming the above while the lamp is on may result in damage to data/SD card or this unit.Inserting/removing an SD cardWhen using an SD card not from Panasonic, or one previously used on other equipment, for the firsttime on this unit, format the SD card. (l 91) When the SD card is formatted, all of the recorded datais deleted. Once the data is deleted, it cannot be restored. Copy valuable data onto a PC, DVD discetc. before proceeding with the formatting. (l 100, 112)OPENAccess lamp [ACCESS] A≥ When this unit is accessing the SD card orbuilt-in memory, the access lamp lights up.
