Panasonic HDC-TM700PC Service Manual

Also see for HDC-SD700EB: Service manual

Panasonic HDC-TM700PC Service Manual Manual pdf 17 page image

176 Service Mode1. Indication method of the service menuSet the mode dial “Motion Picture Recording” mode.2. Turn the power on, and then while keep pressing the “Zoom lever” to W side, “Intelligent auto/Manual” button and “Menu” but-ton for more than 3 seconds until the top screen of the Service Mode Menu being displayed.Service mode menuNOTE:Do not using service mode except above table of Service mode menu.3. End method of the top screen of the service mode menuPush the “Menu” button to end the service mode, and then POWER OFF.Screen display Contents Function1 Factory settings Function to throw a product up in a factory shipment state(When recorded data in Built-in memory, “error display” is done)3 Built-in memory self check execution(HDC-TM700 only)Function to check self as for the state of Built-in memory4 Lock search history indication Display the camera system error cord for three histories savedin EEPROM5 Power ON self check result display Power ON self check (function to diagnose correct function ofthe device and interface between devices) result display