105VQT3J15Managing the copied disc≥ Connect this unit to the DVD burner and then touch [PLAY DISC]. (l 101)∫ Formatting discsThis is for initializing DVD-RAM, DVD-RW and +RW discs.Please be aware that if a disc is formatted, then all the data recorded on the disc willbe erased. Back up important data on a PC etc.≥ When formatting is complete, touch [EXIT] to exit the message screen.≥ Connect this unit and the DVD burner to format discs.You may no longer be able to use the discs if you format them on another device such as aPC etc.∫ Auto protectYou can protect (write protect) a DVD-RAM disc when copying motion pictures in highdefinition picture quality or DVD-RW disc when copying motion pictures or still pictures inhigh definition picture quality to the disc.1 Select the menu.≥ If a disc that you copied to is inserted in another device without protecting it, a messagemay be displayed prompting you to format the disc. We recommend setting [AUTOPROTECT] to [ON] in order to prevent accidental deletion.2 Copy to the disc. (l 102)≥ After copying, the disc is write-protected.To release the disc protection≥ Touch [EXIT] and close the message screen after the auto protection is released.∫ Displaying disc informationInformation, such as the type of recorded disc, the number of recorded scenes and whetheror not the disc is finalized is displayed.≥ Touch [EXIT] to exit the information screen.: [DISC SETUP] # [FORMAT DISC]: [DISC SETUP] # [AUTO PROTECT] # [ON]: [DISC SETUP] # [CANCEL PROTECT]: [DISC SETUP] # [DISC STATUS]MENUMENUMENUMENU
