Panasonic HDC-Z10000 Basic Operating Instructions Manual

Also see for HDC-Z10000: Operating instructions

21(ENG) VQT3V01The viewfinder is turned off and the LCD monitor is turned on when the LCD monitor isextracted. The viewfinder is turned on when the LCD monitor is retracted.It is possible to check the images recorded during 3D recording or scenes recorded in 3D as3D when LCD monitor is used.Using the LCD monitor1 Extract the LCD monitor in thedirection as indicated in thefigure.≥ Hold the LCD monitor extract part A whenpulling out.2 Rotate to the position that is easy toview.To retract the LCD monitorRetract as shown in the figure with the LCD facingdownward.Range of rotation of the LCD monitor≥ It can rotate up to 270o B towards the lens.PreparationUsing the LCD monitor/Viewfinder≥ There are differences in the way that different people experience 3D images.Check from a position directly in front of and at around 30 cm from the LCDmonitor, where you can easily see picture.