63VQT2U82When recording, the input level from the built-in microphones can be adjusted.≥ Change the mode to .≥ Switch to manual mode. (l 71)1 Select the menu.≥ It is possible to select the setting from the quick menu in manual mode. (l 34) Themicrophone level returns to the setting adjusted previously, and it cannot be set from thequick menu.2 Touch / to adjust the microphone inputlevel.≥ Touch to activate/disactivate AGC. When AGC isactivated, the icon is surrounded by yellow and theamount of sound distortion can be reduced. WhenAGC is disactivated, natural recording can beperformed.≥ Adjust the microphone input level so that the last2 bars of the gain value are not red. (Otherwise, thesound is distorted.) Select a lower setting formicrophone input level.3 Touch [ENTER] to determine the microphoneinput level and then touch [EXIT].≥ (Microphone input level meter) appears on the screen.≥ When switching to intelligent auto mode, the setting is fixed to [AUTO] and cannot bechanged.≥ When [ZOOM MIC] is [ON], the volume will be different depending on the zoom rate.≥ The microphone input level meter shows the larger of the inputs from the 2 built-inmicrophones.≥ You cannot record with the audio completely muted.[MIC LEVEL]: [RECORD SETUP] # [MIC LEVEL] # desired setting[AUTO]: AGC is activated, and the recording level is adjustedautomatically.[SETr ]/[SET]: The desired recording level can be set.A LeftB RightC Microphone input level