87VQT3B18Automatic white balance function may not reproduce natural colors depending on the scenesor lighting conditions. If so, you can adjust the white balance manually.≥ Press the iA/MANUAL button or CAMERA FUNCTION button to switch to ManualMode. (l 86)≥ For how to perform the settings when using the viewfinder, refer to page 86.1 Touch [WB].2 Touch / to select Whitebalance mode.≥ Select the optimal mode by confirming thecolor on the screen.≥ To return to auto setting, set to orpress the iA/MANUAL button again.∫ To set the white balancemanually1 Select , fill the screen with awhite subject.2 Touch and set the blinking .≥ When using the viewfinder, press and holdthe CAMERA FUNCTION button.≥ When the screen turns black instantly andthe display stops flashing and thenlights constantly, the setting is complete.≥ If the display continues flashing, thewhite balance cannot be set. In this case,use other White balance modes.≥ When the display flashes, the manualwhite balance previously adjusted isstored. Whenever recording conditionschange, re-set the white balance.≥ When setting both the white balance andthe iris/gain, set the white balance first.≥ is not displayed on the screenwhen is being set.White balanceIcon Mode/Recording conditionsAuto white balanceadjustmentSunny modeOutdoors under a clear skyCloudy modeOutdoors under cloudy skyIndoor mode 1Incandescent light, video lightslike in the studio, etc.Indoor mode 2Color fluorescent lamps, sodiumlamps in gymnasiums etc.Manual adjustment mode≥ Mercury-vapor lamps,sodium lamps, somefluorescent lights≥ Lights used for weddingreceptions at hotels, stagespotlights in theaters≥ Sunrise, sunset, etc.F IRISSHTRWBFOCUSAWBAWBAWBF IRISSHTRWBFOCUSAWBAWB
