50VQT1Z093 Open the LCD monitor or extendthe viewfinder.The status indicator A lights red and the unit isput into recording pause.≥ Quick Start Standby Mode is canceled ifjabout 5 minutes have elapsedjmode is set tojunit is turned off≥ Time for Quick Start will be more than 0.6seconds slower when the digital cinema isused.≥ Depending on the recording conditions, timefor Quick Start may be more than 0.6 secondsslower in Still Picture Recording Mode.≥ It may take some time for Automatic WhiteBalance to adjust.≥ In the Quick Start Mode, the zoommagnification becomes 1k.≥ If [ECONOMY] (l 36) is set to [5 MINUTES]and the unit automatically goes into Quick StartStandby Mode, close the LCD monitor andthen open it again.≥ Quick Start Standby Mode cannot be releasedby the remote control. Turn the mode to OFFwhen powering off.(Only when recording to an SD card or built-in memory)The unit is put into recording pause approx.1.9 seconds when the mode is set to orfrom OFF.≥ Start time will not shorten if there is no SD cardinserted.Start time will be shorten if the [Built-inMemory] is selected in the [MEDIA SELECT],even if there is no SD card inserted.¬ Change the mode to or .1 Select SD card as a media torecord from the menu. (l 33)2 Select the menu. (l 33)≥ This function’s default setting is [ON].≥ Depending on the recording conditions, starttime may be longer than 1.9 seconds in StillPicture Recording Mode.≥ In the Quick Power on Mode, the zoommagnification becomes 1k.HDC-HS300HDC-TM300Quick power on[MEDIA SELECT] # [SD CARD][SETUP] # [QUICK POWER ON] # [ON]
