Panasonic HL-C2 Series User Manual

Also see for HL-C2 Series: User manual User manual User manual User manual

124. Sensor Connection4-1 Mounting ConsoleFor the installation of the GT Series in detail, refer to "Chapter 3 Installation andWiring" of the "GT-series User's Manual".Use the four mounting brackets and four mounting screws provided and mount theconsole to the mounting plate. GT12 Series (1) Insert the unit into the mounting plate.(2) Attach the mounting brackets to the grooves of the unit.Tighten the screws and fix the unit to the mounting plate securely.Note 1) Use a No. 1 Phillips screwdriver.Note 2) Screw tightening torque of 0.2 to 0.3 N·mNote 3) Do not tighten the screws in excess, or otherwise the frontpanel may deform and the touch switch cannot workproperly. Be sure to keep the above torque range.Enlarged viewPhillips screwdriverMake sure that thedirection of thescrew is correct.Insert the screw tothe end.