Panasonic HX-WA03PP Service Manual

Panasonic HX-WA03PP Service Manual Manual pdf 6 page image

62.3. How to Replace the Lithium Battery2.3.1. Replacement Procedure1. Remove the MONITOR P.C.B.. (Refer to Disassembly Procedures.)2. Unsolder the each soldering point of electric lead terminal for Lithium battery (Ref. No. “Z3001” at component side of MONI-TOR P.C.B.) and remove the Lithium battery together with electric lead terminal. Then replace it into new one.NOTE:The Type No. VU6450516009 includes electric lead terminals.NOTE:This Lithium battery is a critical component.It must never be subjected to excessive heat or discharge.It must therefore only be fitted in requirement designed specifically for its use.Replacement batteries must be of same type and manufacture.They must be fitted in the same manner and location as the original battery, with the correct polarity contacts observed.Do not attempt to re-charge the old battery or re-use it for any other purpose.It should be disposed of in waste products destined for burial rather than incineration.NOTE:Above caution is applicable for a battery pack which is for HX-WA03/WA3 series, as well.