48 VQT4X05If the Wi-Fi connection cannot be establishedPlease refer to the operating instruction of the device in use for detailsabout the setting of the wireless access point or smartphone.Problem Check pointsIt cannot connectto the wirelessaccess point.The wirelessaccess point is notdetected.(General)≥ Turn ON the wireless access point.≥ Approach the wireless access point andreconnect.≥ If it takes time to complete the connection,the Wi-Fi connection will be aborted.Reset the connection settings.≥ Check how to connect to the wireless accesspoint and how to set the security settings.≥ Make sure the wireless access point isregistered in this unit.≥ The device may be unable to locate thewireless access point due to problems withthe signal. Use [Manual Connection].≥ The Wi-Fi function will not work underwater.(Easy Connection)≥ Make sure the wireless access point is inthe correct WPS standby mode.≥ Make sure the PIN code has been correctlyinput.(Manual Connection)≥ Make sure the SSID and password havebeen correctly input.≥ Check the Authentication method,Encryption type, and Encryption key(Password).Radio waves of thewireless accesspoint getdisconnected.≥ The condition may improved by moving thelocation or changing the angle of thewireless access point.≥ If you use another 2.4 GHz band device such asa microwave oven or cordless telephone nearby,you may interrupt the signal. Keep a sufficientdistance from these types of devices.