VQT3P50 39SETUPHINTTo correct the date and time settings1 Turn on the camera.2 Display the Option Setting Menu 1 (page 109).3 Select [CLOCK SET] and press the SET button.h The screen to set the date and time appears.h The current date and time settings are shown.4 Select the line you wish to change, and make the correction.If the camera’s date and time are not set...h The screen display and capture date information will show as follows:* The date and time format is determined by the [DISP] setting specifiedon the Clock Set Screen.Recording Screen display: ---.--.---- --:--Photo capture date/time information: JAN/01/2011 00:00:00Video/audio file recording date/time information: JAN/01/2011 00:00:00Date and time backupUnder normal conditions, while the battery pack is being replaced, an internalbattery will maintain the date and time settings. However, there is a smallchance the settings may be lost (the backup will last for about 7 days). It isrecommended to check that the date and time settings are still correct afterreplacing the battery pack and before shooting or recording of any type.HINTAbout the internal backup batteryi This camera’s internal battery serves to maintain the date and timesettings, as well as the shooting settings. To charge the backup battery,leave the fully charged battery pack installed in the camera continuouslyfor about 2 days. In the fully charged state, the backup battery will maintainthe camera settings for about 7 days.
