- 146 -∫ To disconnect USB cable safelySelect the icon in task tray displayed on the PC, and then click[Eject Panasonic Camcorder].≥ Depending on your PC’s settings, this icon may not be displayed.≥ Do not use any other USB cables except the supplied one. (Operationis not guaranteed with any other USB cables.)≥ When this unit is connected to a PC using a USB cable while the unit isturned on, power is also supplied from the PC to this unit.≥ When performing reading/writing between a PC and an SD card, beaware that some SD card slots built into PCs and some SD cardreaders are not compatible with the SDHC Memory Card or SDXCMemory Card.≥ When using an SDXC Memory Card, check the following support site.http://panasonic.net/avc/sdcard/information/SDXC.htmlUse as a card readerConnect the unit to a PC and set the unit to card readermode. (l 145)≥ The LCD monitor will turn off.≥ The Smart wizard screen is automatically displayed when HD WriterVE 2.0 is installed.≥ This unit is automatically recognised as an external drive of the PC.(l 147)≥ File is read from the SD card if one is inserted or the built-in memory ifno SD card is inserted.≥ When you select an option other than [CARD READER], reconnect theUSB cable.About the status indicator of the unit≥ While the unit is connected to a PC, the status indicator lights up ingreen.≥ While the unit is accessing the SD card or the built-in memory, thestatus indicator illuminates in red. During access, do not disconnectthe USB cable or remove the battery.
