VQT4F46 167∫ Using Direct ModeThe files can be transferred directly from the Eye-Fi card to a smartphoneor tablet without going through the access point when necessary settingis performed in a PC in advance.≥ Install the software supplied with the Eye-Fi card on your PC, andconfigure the Direct Mode settings.Select the menu.≥ If any of the following operations is performed, the Direct Mode will becanceled.j If you turn the unit offj Closing the LCD monitor, sending the unit into standby mode.j Starting motion picture or audio recordingThe Direct Mode may be canceled by the Eye-Fi card for reasons otherthan the above.≥ In Direct Mode, the economy mode function (l 45) is disabled.≥ When [TRANSFER] (l 166) is set to [OFF], [START DIRECT MODE]cannot be selected.∫ Selecting files to transferIf you perform the required settings in advance on your PC, you cantransfer selected files alone. For settings methods etc., please read thecard operating instructions or consult the card manufacturer.≥ Install the software supplied with the Eye-Fi card on your PC, andconfigure the selection transfer settings.Select the menu.≥ The settings method is the same as for the protect settings. (l 131)≥ For the files set for selected transfer, is displayed on thethumbnail screen (1-file display).≥ If you have not performed selected transfer settings on your PC,[PROTECT] is displayed and the selection transfer setting is disabled.[MENU]: # [Eye-Fi] # [START DIRECT MODE][MENU]: # [TRANSFER/PROTECT]31
