Panasonic JT-H320HT-E1 Operating Instructions Manual

Contents

7Drop impact/damagepp Handle this product with care because this product is precision equipment. Do not applyimpact on this product, drop this product, or put a heavy object on this product.pp Do not damage the scanner reading portion.System operationpp Be sure to turn off the power before battery pack replacement.How to carepp Be sure to turn off the power before taking care of this product.pp Use a dry soft cloth to remove dirt from this product. When stubborn stains areobserved, use a tightly twisted water soaked cloth to wipe the point softly and use dryanother cloth to wipe the point again.pp Do not use thinner, benzene, wax, kerosene, soap, polish, hot water, chemical cloth,and the like.pp Use a dry soft cloth to clean the scanner reading portion depending on the level of dirt.pp The dirty reading portion may cause barcode reading failure.pp When the scanner is cleaned, the wiping direction shall be vertical to the scannerreading portion.pp The dirty connector may cause communication failure.pp Use a dry soft cloth to clean the power feeding terminal depending on the level of dirt.pp The dirty terminal may cause failure in charging the mobile terminal.Touch panelpp Use a finger or the supplied touch pen to enter data on the touch panel. Do not applyexcessive load to the touch panel. Do not use a sharp-pointed hard object (ex. ballpointpen and mechanical pencil) to operate the touch panel.Getting Started