Panasonic KT7 Instruction Manual

Also see for KT7: Instruction manual

Contents

Panasonic KT7 Instruction Manual Manual pdf 1 page image

1Instruction manual Temperature Controller KT7 No. KT71E7 2013.05To prevent accidents arising from the misuse of this controller, please ensure the operator receivesthis manual.SAFETY PRECAUTIONSBe sure to read these precautions before using our products.The safety precautions are classified into categories: “Warning” and “Caution”.Warning: Procedures which may lead to dangerous conditions and cause death or serious injury, if notcarried out properly.Caution : Procedures which may lead to dangerous conditions and cause superficial to medium injuryor physical damage or may degrade or damage the product, if not carried out properly.Warning• When using this controller on occasions which serious injury would be expected to occur or when damageis likely to expand or proliferate, make sure to take safety measures such as installing double safetystructures.• Do not use this controller in an environment with flammable gases, or it may cause explosion.Caution• Fasten the electric wire with the terminal screws securely. Imperfect connection may cause abnormalheating or fumes.• Use this controller according to the rating and environmental conditions. Otherwise abnormal heating orfumes may occur.• Do not touch the terminals while the power is supplied to the controller, as this may cause electric shock.• Do not disassemble or modify the controller, as this may cause electric shock or fumes.Caution• This instrument should be used according to the specifications described in this manual.If it is not used according to the specifications, it may malfunction or cause fire.• Be sure to follow the warnings, cautions and notice. If not, it could cause serious injury or accidents.• The contents of this instruction manual are subject to change without notice.• This instrument is designed to be installed in a control panel. If not, measures must be taken to ensurethat the operator cannot touch power terminals or other high voltage sections.• Be sure to turn the power supplied to the instrument OFF before cleaning this instrument.• Use a soft, dry cloth when cleaning the instrument.(Alcohol based substances may tarnish or deface the unit.)• As the display section is vulnerable, do not strike or scratch it with a hard object.• Any unauthorized transfer or copying of this document, in part or in whole, is prohibited.• Matsushita Electric Works, Ltd. is not liable for any damage or secondary damage(s) incurred as a resultof using this product, including any indirect damage.1. Model number1.1 Explanation of model numberA K T 7 1 1 0(1) (2) (3) (4) (5) (6)(1) Supply voltage ------------ 1: 100 to 240V AC, 2: 24V AC/DC(2) Input type ------------------- 1: Multi-input (Thermocouple, RTD, DC current and DC voltage can beselected by keypad operation. For DC current input, 50 shunt resistor(AKT4810, sold separately) must be connected between input terminals.)(3) Control output (OUT) ---- 1: Relay contact, 2: Non-contact voltage (Voltage output for SSR drive),3: DC current(4) Alarm output --------------- 1: Alarm output (1 point)(The alarm type and Energized /Deenergized can be selectedby keypad operation)(5) Heater burnout alarm ---- 0: Not available, 1: Available (5A), 2: Available (10A), 3: Available (20A),4: Available (50A)(Heater burnout alarm is not available for the DC current output)(6) Serial communication --- 1: Applied (The number is indicated only when Serial communication is added.)