4.3. DIMM Module ExtensionA maximum of 256 MB extended memory may be required depending on the combination of the paper size, resolution and grayscale mode.To determine how much extended memory is required, refer to the following page “Additional Memory Size each scanning mode(MB)”.* Recommended DIMM•• JEDEC-standard 168pin, dual in-line memory module (DIMM)•• Non buffered•• Single +3.3V±0.3V power supply•• Frequency/ CAS Latency : 100MHz/CL=2, 133MHz/CL=2, 133MHz/CL=3•• 64MB, 128MB or 256MB may be used.(Reference) DIMM module which has been evaluated using this scanner•• Manufacturer: DELKIN DEVICES1. Model No.: DM168-064Y3Q488-10S2P (64MB)2. Model No.: DM168-064Y3Q446-10S2P (64MB)3. Model No.: DM168-128Y3Q488-10S4P (128MB)Note:Originally, SCSI board has 16MB memory except for the above additional memory.4.4. Removing SCSI Board1) Make sure the Power is OFF.2) Remove SCSI Board. (See 8.3.15)Additional Memory Size each scanning mode ( MB )Simplex/4bit, 8bitSize Resolution (dpi)100 200 300 400 500 600A3 0 0 64 64 64 128A4 0 0 0 0 64 64A5 0 0 0 0 0 64A6 0 0 0 0 0 0B4 (JIS) 0 0 0 64 64 64B5 (JIS) 0 0 0 0 64 64B6 (JIS) 0 0 0 0 0 0Double Letter 0 0 64 64 64 128Legal 0 0 0 64 64 64Letter 0 0 0 0 64 648KV-S2065L / KV-S2065W&RQILGHQWLDO .0( 3ULQWHU ',9 &6 +3
