Panasonic KV-Sl3066 Operating Manual

Contents

5 Operation Panel1 2 3 54 67LED (Red)Lights when an error occurs.LED (Green)Shows the scanner’s status.Power button ( )For details, see "6.1.1 Turining ON/OFF the unit's power" (page 19).Cursor buttonSkip button ( )If you press this button after a double feed is detected and scanning has been paused, the document (ordocuments) detected as a double feed will be scanned, and then ejected from the scanner. Scanning willcontinue after the document is scanned and ejected.Start/Stop button ( )• If you set [Wait Key] for "Manual Feed Mode" in your application software, pushing this button startsscanning. For details about "Manual Feed Mode", refer to the Image Capture Plus, TWAIN, or ISIShelp.• During scanning, pushing this button stops scanning.• If you press this button after a double feed is detected and scanning has been paused, the document(or documents) detected as a double feed will be ejected from the scanner without being scanned.Scanning will stop.7-segment LEDIf you are using the scanner with Image Capture Plus, you can perform a push scan using the 7-segment LED. A registered job number is displayed on the 7-segment LED. Use the cursor button ( )to select a job.5 Operation Panel17