Panasonic KX-A243 Installation Instructions Manual

Contents

installation instructions

Installation Instructions2. Lay the Hybrid IP-PBX on its back, with the front side facing up. Remove the screws from the underside of the base,as shown. (3 screws on the KX-TDA100, 4 screws on the KX-TDA200.) Remove the base.3. Remove the 4 screws as shown. Remove the side panels.Note: Retain these screws for use in step 5.1. Remove the front cover. Refer to "Opening/Closing the Front Cover" in the Installation Manual.KX-A243 Brackets(for use with KX-TDA100)KX-A242 Brackets(for use with KX-TDA200)441 4 4Unpacking219-inch Rack Mounting Adaptor, KX-A242/KX-A243 Installation11Rear Cover Side Cover Bracket Screw Rail Screw Washer NutKX-TDA200KX-TDA100Model shown is KX-TDA200.OR