40Receiving FaxesTEL/FAX mode!(receiving phone calls with ring signals and faxeswithout ring signals when you are near the unit)Use this mode when you are situated near the fax machine, and want to receive faxes withoutthe unit ringing. When a call is received, the fax machine will work as follows. To set TEL/FAXmode, see below.To set TEL/FAX mode1. Set feature #77 to “TEL/FAX” (p. 70).2. If the arrow (t) is not shown on the right of thedisplay, turn it on by pressing PQ.Display:ONtThe fax machine will not ring.Duration depends on TEL/FAXdelayed ring setting.(See bottom of next page.)l The call is connected.Phone callFax callingtone*A call is received.The fax machine will automaticallyreceive documents withoutringing.Answer the call.l If the call is not answered, this messagewill be played (KX-FP155 only).**l Then the fax machine will activate thefax function for a case in which theother party’s fax machine does notsend a fax calling tone.The fax machine will ring 3 times.Duration depends on silent faxrecognition ring count(See bottom of next page.)Hello! To send a fax, starttransmission.To speak with someone,please wait.This message will be played to thecalling party (KX-FP155 only).l The calling partywill hear a differentring back tone.No one is available to takeyour call right now.Please try again later.Thank you.RingRingRing* A fax calling tone is automatically generated bythe sending fax machine. Some fax machinesdo not have this capability.** You can record your own greeting message(p. 49) (KX-FP155 only).Note:l The fax machine will display the following when acall is received.Display:l The ringer should be on (p. 21).INCOMING CALLKX-FP151/155(E)(040-047) 01.12.19 10:10 AM Page 40