Panasonic KX-FP80 Operating Instructions Manual

32Sending Faxes1 Insert the document FACE DOWN.l If necessary, pressrepeatedly to select the desired setting(p. 26).2 Rotate until the following isdisplayed.Display:3 Press .4 Rotate until the desired nameis displayed.Example:5 Press .l To program other stations, repeat steps 4and 5 (up to 20 stations).6 Press after programming allof the desired stations.l The document will be fed into the unit andscanned into memory. The unit will thentransmit the data to each station, callingeach number sequentially.l After transmission, the stored document willbe erased automatically, and the unit willautomatically print a broadcast sendingreport (p. 35).FAX STARTDIR=Bill [001]SETBill [000]JOG DIALDIR= [000]SET TIME BROAD>JOG DIALRESOLUTIONFACE DOWNJOG DIALSTOPSETDisplayFAX STARTRESOLUTIONOne time broadcast transmission!This feature is useful for sending the same document to selected parties whose fax numbers arestored in the JOG DIAL directory. If you only wish to send a document once, select the partiesfor each transmission.Before programming, make sure that the desired stations have been stored in the JOGDIAL directory (p. 20).Note:l If you select the “FINE”, “SUPER FINE” or“HALF TONE” resolution, the number ofpages that the unit can transmit will decrease.l If one of the stations is busy or does notanswer, the station will be skipped. Allskipped stations will be redialed up to 2 timesafter all of the other stations have beencalled.To cancel the broadcast setting1. Press while the unit displays the followingmessage.Display:l The display will show the following.2. Press .SETYES:SET/NO:STOPSEND CANCELED?BROADCASTINGSTOPKX-FP80 (032-035) 00.2.21 9:46 AM Page 32