Erases a specific messageErases all messagesChanges to the TEL modeTurns ON message transferTurns OFF message transferTurns ON pager callTurns OFF pager call57Remote OperationRemote commandThe following operations can be performed from a remote location using a touch tone telephone.Program the remote operation ID (feature #11 on page 63) and set the unit to the TAD/FAXmode before going out (p. 50).Dial key Page Dial key Remote command PageSkips the greeting messageRepeats a messageSkips a messageNew message playbackAll message playbackRoom monitorRe-records a greeting messageStops re-recording of a greetingmessage97654210 5958585858595959 8 48 38 28 18 054 59595959595959Remote operation cardPlease cut out and carry this card for assistance when using the remote operation.Answering DeviceRemote OperationNotice of Remote OperationFold here1. Call your unit.2. Enter the remote operation IDduring the greetingmessage.l The new messages will beplayed automatically.l If there are no newmessages, wait for 4seconds. All the messageswill be played back.3. Press the remote commandkey(s) within 10 seconds (seethe reverse side).l The remote operation isavailable only from a touchtone telephone when the unitis in the TAD/FAX mode.l When the unit is in the TELmode, call your unit and waitfor 15 rings. The answeringdevice will temporarily answerthe line. Enter the remoteoperation ID during thegreeting message. The unit willswitch to the TAD/FAX mode.l When you press a key, pressfirmly.l To send a document, press. When a fax tone isheard, start transmission.9Operating from a remote location!