Panasonic KX-FPC161 Operating Instructions Manual

Also see for KX-FPC161: Controls layout

Contents

Panasonic KX-FPC161 Operating Instructions Manual Manual pdf 63 page image

63Error MessagesFor fax advantage assistance, call 1-800-435-7329.Display!If the unit detects a problem, one or more of the following messages will appear on the display.Display message Cause & solutionl There is something wrong with the unit. Contact our servicepersonnel.CALL SERVICE2CALL SERVICEl The document was not fed into the unit properly. Reinsert thedocument. If misfeeding occurs frequently, clean the documentfeeder rollers (p. 74) and try again.CHECK DOCUMENTl Memory (telephone numbers, parameters, etc.) has been erased.Re-program.CHECK MEMORYl The covers are open. Close them.l The ink film is empty. Replace the ink film with a new one (p. 12).l The ink film is not installed. Install it (p. 12).l The ink film is slack. Tighten it (see step 7 on page 13).CHECK FILMCOVER OPENl The recording paper is not installed or the unit has run out ofpaper. Install paper and press to clear the message.l The recording paper is not fed into the unit properly. Reinstallpaper (p. 15) and press to clear the message.l The recording paper has jammed near the recording paperentrance. Clear the jammed paper (p. 70) and press toclear the message. Do not install folded or heavily curled paper.SETSETSETCHECK PAPERl The unit has a document in memory. See the other displayedmessage instructions to print out the document.FAX IN MEMORYl The memory is full of received documents due to a lack ofrecording paper or a recording paper jam. Install paper or clearthe jammed paper.l When performing memory transmission, the document beingstored exceeds the memory capacity of the unit. Transmit theentire document manually.FAX MEMORY FULLl There is no space to store new items in the directory. Eraseunnecessary items (p. 29).DIRECTORY FULLl When making a copy, the document being stored exceeds thememory capacity of the unit. Press to clear themessage. Divide the document into sections.STOPMEMORY FULL(continued)