17Making a copyThe unit can make single or multiple copies (up to 50). Any transmittable document can be copied.1 Open the document feeder tray.2 Adjust the width of the document guides to the sizeof the document.3 Insert the document (up to 10 sheets) FACEDOWN until a beep tone is heard.Display:4 Press repeatedly to select thedesired setting, if necessary (see below).5 Press .Display:l If you need two or more copies, enter the numberof copies (up to 50).6 Press .l The unit will start printing.COPYINGCOPY STARTNUMBER=1COPY STARTRESOLUTIONSTANDARDNote:l If a resolution is not set, FINE resolution willautomatically be selected.l You can make or receive a voice call while making acopy.To feed 10 or more sheetsat a timeInsert the first 10 sheets of the document. Addthe extra sheets (up to 10) before the last sheetis fed into the unit.To stop copyingPress .To eject the document, press again.STOPSTOPWhen you make two or morecopiesThe unit will print with sorting. If you wish toprint with stacking up, set the sorting feature tooff.Note:l Using the fine, super fine or half tone setting willincrease the transmission time.l If the resolution setting is changed during feeding,it will be effective from the next sheet.l The super fine resolution only works with othercompatible machines.STANDARDFINESUPER FINEHALF TONEFor printed ortypewritten originalswith normal-sizedcharacters.For originals withsmall printing.For originals withminute printing.For originals containingphotographs, shadeddrawings, etc.Selecting the resolutionSelect the desired resolution according to the type ofdocument.FACE DOWNDocument guidesRESOLUTION STOPCOPY STARTDisplay