Panasonic KX-FPC95 Operating Instructions Manual

Contents

Panasonic KX-FPC95 Operating Instructions Manual Manual pdf 60 page image

60Receiving Faxes1 When the unit rings, lift the handset toanswer the call.2 When:— document reception is required,— a fax calling tone (slow beep) is heard, or— no sound is heard,press .3 Replace the handset. The unit will start fax reception.CONNECTING.....FAX STARTHandsetSTOPAUTO ANSWERFAX STARTDisplayTo stop receivingPress .Friendly reception featureWhen you answer a call and hear a fax callingtone (slow beep), the unit will automatically startfax reception. If this feature is not required, set feature #46 to“OFF” (p. 86).STOPTEL mode!(answering all calls manually)If the arrow () is shown on the right of thedisplay, turn it off by pressing .Display:ONTEL1MODEAUTO ANSWERNote: If you do not answer the call within 15 rings,the unit will temporarily activate the answeringdevice. The greeting message will then beplayed. If the remote operation ID (feature#11 on page 83) is entered during thegreeting message, the unit will change to theTAD/FAX mode. Up to 30 sheets of printed paper can be held.Remove the printed paper before it exceeds30 sheets.Fax reception in memoryWhen a printing problem is detected, the unit willtemporarily store the received document intomemory.While the document is in memory;— the display will show an error message and thefollowing message alternately.Display:— slow beeps will sound (memory reception alert).See feature #44 on page 86. Follow the instructions on pages 90 and 91 tosolve the problem. For memory capacity, see page 109.FAX IN MEMORYActivating the TEL modeReceiving a fax manuallyTALKFAX1 When the handset rings, press .2 When:— document reception is required,— a fax calling tone (slow beep) is heard, or— no sound is heard,press until a single beep is heard. The only way to stop receiving a fax is bypressing on the main unit.STOPFAXTALK With the handset With the main unit