Panasonic KX-HCM10 Operating Instructions Manual

Also see for KX-HCM10: Operating instructions Operating instructions Operating instructions Operating instructions Operating instructions

Contents

Operating Instructions95(*1) : Address must be composed of four numeral characters (0 to 255) and deivided with 3 dots, such as 192.168.0.253. (Can not use "0.0.0.0" and "255.255.255.255")(*2) : ["], ['], [#], [&], [%], [=], [+], [?], [<], [>], [:] are not available in the ASCII characters.(*3) : [Space], ["], ['], [#], [&], [%], [=], [+], [?], [<], [>], [:] are not available in the ASCII characters.(*4) : [Space], ["], ['], [#], [&], [%], [=], [+], [?], [<], [>], [:] are not available in the ASCII characters andCharacter set is like [text] + [@] + [text] + [.] + [text](*5) : [Space], ["], ['], [#], [&], [%], [=], [+], [?], [<], [>] are not available in the ASCII characters.No Items Factory Defaultvalue Indispensable setting Note7 1. White Balance Auto Auto, Fixed (Indoor/Fluoroscent_1/Fluoroscent_2/Outdoor), HoldCameraSetup 2. Power Line Frequency 60 Hz 60 Hz, 50 Hz3. Brightness Control4. Pan/Tilt ControlEnableEnable------8 Multi-Camera 1. 2nd Network Camera No check - -IP Address or Host Name [Blank] Required when using Multi-CameraRequired when using Multi-CameraRequired when using Multi-CameraRequired when using Multi-CameraRequired when using Multi-CameraRequired when using Multi-Camera(*1) or (*5)Camera Name [Blank] (*3) 1 to 15 Characters2. 3rd Network Camera No check - -IP Address or Host Name [Blank] (*1) or (*5)Camera Name [Blank] (*3) 1 to 15 Characters3. 4th Network Camera No check ----IP Address or Host Name [Blank] (*1) or (*5)Camera Name [Blank] (*3) 1 to 15 Characters9 Digital OutputControl 1. Open/Short to GND Open10 LED Control 1. Turn on the LED during Power ON Selected1. Turn off the LED always Not-selected - ---11 Update Firmware File Name [Blank] Required when using Update Firmware -