Panasonic KX-HCM110A Troubleshooting Manual

Also see for OneHome KX-HCM110A: Operating instructions Operating instructions Installation guide Instruction manual Operating instructions

Contents

Troubleshooting16Audio is notproduced froman externalspeakerconnected tothe camera.• The Talk button appears like this:Click the Talk button. (It will change to .)• The Talk button is gray.[Talk] is not permitted on the General User page. Permit it.(See page 84 of Operating Instructions on the Setup CD-ROM)• Microphone is not selected on your PC's volume control screen.Click [Options] [Properties] , and check [Recording] onthe Volume Control window. In the "Show the followingvolume controls" column, check [Microphone], and click[OK]. Check [Select] on the Recording Control window.• The PC's microphone input setting is set to mute.Open the PC's Volume Control window, check themicrophone checkbox and then adjust the volume controls.• A speaker is not connected to the camera.The camera's audio output terminal is a line output. Connectit to an external speaker with a built-in amplifier (see page 31of Operating Instructions on the Setup CD-ROM).• An amplifier is not connected to the camera.The camera's audio output terminal is a line output. Connectit to an external speaker with a built-in amplifier (see page 31of Operating Instructions on the Setup CD-ROM)• Audio can only be received for short periods of time.Change the settings to extend the PC Audio Input Timeout.(See page 78 of Operating Instructions on the Setup CD-ROM)• The camera speaker volume settings are set to minimum.Adjust the volume settings to an appropriate volume.• The camera access is going through a proxy server.The audio feature cannot be used when going through aproxy server.Problem Cause and Remedy