Panasonic KX-HDV100 Supplement For Administrator Manual

Also see for KX-HDV100: Administrator's guide Operating instructions Supplement for administrator guide

Contents

5. 5.3.24 VQ Report by PUBLISHAdd the following configuration parameter.VQREPORT_SEND_OPT_CODEC_ENABLEValue FormatDescriptionValue RangeDefault ValueVQREPORT_SEND_OPT_NW_CHANGEValue FormatDescriptionValue RangeDefault Value6. 5.3.25 Telephone SettingsAdd the following configuration parameter.CNIP_FROM_ENABLEValue FormatDescriptionValue RangeDefault ValueIDLE_DISPLAY_TYPEValue FormatDescriptionValue RangeDefault Value・Y: Use 'FROM' header・N: Use 'PAI' headerNBOOLEAN3INTEGERSpecifies what is shown on the display in standby mode.・0:Off・1:Phone Number・2:Phone Number&Name・3:NameNote"Name" is the display name for the line.NINTEGERSpecifies the number of consecutive times the MOS (Mean Opinion Score) valuemay fall below the threshold value specified by eitherALERT_REPORT_MOSQ_CRITICAL or ALERT_REPORT_MOSQ_WARNINGbefore the phone sends VQREPORT.The ALERT_REPORT_TRIGGER setting determines whetherALERT_REPORT_MOSQ_CRITICAL or ALERT_REPORT_MOSQ_WARNING isused as the threshold.0–5(The number of consecutive times. 0:Disable)NoteIf "2" is specified and the MOS value falls within the threshold 2 consecutivetimes, VQREPORT is sent.0Specifies whether to use the 'FROM' header or the 'PAI' header in CNIP (CallingNumber Identification Presentation).BOOLEANSpecifies whether to enable the sending of VQREPORT (SIP-PUBLISH) whenthe codec is changed.・Y: Send VQREPORT when a change of codec is detected・N: Send VQREPORT at the end of a conversation