6.3.2 XSI Service SettingsPhone settings for using XSI services can be set using configuration parameters or the Web user interface(administrators only).See 4.3.7 Xtended Service Settings for making settings using the Web user interface.The following parameter names will be displayed and can be set as needed.Parameter Name Description ReferenceXSI_ENABLE Enables XSI services. Page 209XSI_SERVER Specifies the XSI server. Page 209XSI_SERVER_TYPE Specifies the communication method. Page 209XSI_SERVER_PORT Specifies the port used for communication with the XSI server. Page 209XSI_USERID_n Specifies the user name for each user (account) that will useXSI.Page 210XSI_PASSWORD_n Specifies the password for each user (account) that will useXSI.Page 210XSI_PHONEBOOK_ENABLE_nSpecifies whether to enable or disable the Xsi phonebookservice.Page 210XSI_PHONEBOOK_TYPE_nSpecifies the type of Xsi phonebook. Page 210XSI_CALLLOG_ENABLE_nSpecifies whether to enable or disable the Xsi call log service. Page 211NoteTo change settings for the following XSI services using a unit, the parameterADMIN_ABILITY_ENABLE="Y" (see Page 297) must be set. (When ADMIN_ABILITY_ENABLE="N" isset, the settings can only be viewed.)• Remote Office ("Remote Office")• AnyWhere ("Anywhere")• Simultaneous Ring Personal ("SimultaneousRing")• Calling Line ID Delivery Blocking ("Anonymous Call")• Anonymous Call Rejection ("Block Anonymous")NoteThe text in parentheses are shown on the unit display.Operations for accessing the above XSI services1.2. [ ]/[ ]: "Basic Settings" ®OK3. [ ]/[ ]: "Call Settings" ®OK4. [ ]/[ ]: "Remote Office","Anywhere","SimultaneousRing","Anonymous Call", or "BlockAnonymous" ®OK316 Administrator Guide Document Version 2015-126.3.2 XSI Service Settings
