Panasonic KX-HNB600 Setup Manual

Also see for KX-HNB600: Quick setup User guide Systems setup guide Quick setup guide Setup guide

Contents

Panasonic KX-HNB600 Setup Manual Manual pdf 10 page image

Part names and functionsCBAD EG H IFSpeakerLED indicatorDC jackLINE jackMWi-Fi SETUPNUsed when performing initial setup.microSD card slotUsed when inserting a microSD card.Remove the label when inserting.M HANDSET/LOCATORNUsed when registering a handset. Youcan also press this button to locate amisplaced handset.M CAMERANUsed when registering a camera.M OTHER DEVICENUsed when registering a sensor or smartplug.LED indicatorYou can use the LED indicator to confirm thehub’s status.Indicator StatusOff No power, or LEDindicator is turnedoff*1Indicator StatusGreen, lit Normal operation,connected towireless router*1Green, blinking Registration modeAlternating:Green, blinkingYellow, blinkingHub is starting up(cannot be usedyet)*2Red, lit Security system isarmedRed, blinking quickly Security system wastriggeredYellow, lit Initial setup requiredYellow, blinking Initial setup inprogress, mobiledevice connectedYellow, blinkingquicklyInitial setup isstarting*1 You can configure the hub so that its LEDindicator does not light during normaloperation. For more information, refer tothe User’s Guide (page 15).*2 It may take some time for the hub to finishstarting up.ConnectionsInsert the AC adaptor plug firmly into theDC jack.Secure the AC adaptor cord by wrappingit around the hook.Connect the AC adaptor to the poweroutlet.Insert the telephone line cord into theLINE jack and a single-line telephone jack(RJ11C) until you hear a click.DSL/ADSL service users only: Connectyour DSL/ADSL filter (not supplied).Outdoor Camera (KX-HNC600) orIndoor Camera (KX-HNC200) usersonly: Remove the label covering the cardslot and then insert the microSD card (notsupplied) into the slot with the notchedcorner (1 ) facing upwards (2 ) until itclicks into place.10 For assistance, please visit www.panasonic.com/supportSetup