Panasonic KX-HNK101 Operating Instructions Manual
Also see for KX-HNK101: User guideOperating instructions
                                    | |
Installing the mounting bracketInstalling the mounting bracket on wooden wallsLine up the holes on the mounting bracket with the holes in the wall, then insertand tighten each screw.Note:R Use the supplied screws (1 ).R Place the bracket with the “UP” mark facing upwards.11Installing the mounting bracket on gypsum board, ALC (autoclavedlightweight cellular concrete), or concrete blocksUse the supplied anchors and screws to mount the mounting bracket to the wall.Note:R Supplied anchors ø: 5 mm ´ 25 mm (ø: 3/16 inches ´ 1 inch).R Supplied screws ø: 4 mm ´ 25 mm (ø: 5/32 inches ´ 1 inch).1 Mark the hole depth (1 ) on the drill bit at 35 mm (1 3/8 inches) and then drillthe hole.R Use a 3/16 inch (4.8 mm) drill bit.12 Remove debris.12 For assistance, please visit http://shop.panasonic.com/supportSetupHNK101_(en_es)_0618_ver.041.pdf 12 2015/06/18 20:12:06 |
Related manuals for Panasonic KX-HNK101
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine