Panasonic KX-HNL100 Installation Manual

Contents

Ideal exampleStructure supports exterior surfaceAAAAPLACE HOLDERPLACE HOLDERSidingStructure behind sidingConcreteR Do not use the included screws. Usescrew anchors (screw ø: 4 mm(5/32 inches)) designed for concretewalls.R Carefully read the instructionssupplied with the anchors. Followinstructions regarding drill bitdiameter, hole depth, etc.R Drill a pilot hole. Remove any debrisafter drilling the pilot hole.1 Mark the hole depth on the drill bit(A) and then drill a pilot hole.A2 Remove debris.3 Insert the anchor, tighten the screw,then remove the screw to secure theanchor.4 Insert the screw through themounting stand (A) and tighten it.AALC (autoclaved lightweight cellularconcrete)R Depending on the type of ALC panel,you may not be able to attach the unit.Consult the ALC panel manufacturer.R Do not use the included screws. Afterconsulting the manufacturer of theALC panel, use onlycommercially-available metal screwanchors (screw ø: 4 mm(5/32 inches)) designed for ALCpanels.R Carefully read the instructionssupplied with the anchors. Followinstructions regarding drill bitdiameter, hole depth, etc.R Drill a pilot hole. Remove any debrisafter drilling the pilot hole.R Seal the pilot hole with acommercially-available waterproofsealant.Other materials (mortar, tile, etc.)R Do not use the included screws.R Consult the builder or licensedprofessional regarding the type ofanchor appropriate for the installationlocation and materials.R Do not install on gypsum board orconcrete blocks.16 For assistance, please visit http://shop.panasonic.com/supportSetup