Panasonic KX-HNS101AZ Installation Manual

Contents

Panasonic KX-HNS101AZ Installation Manual Manual pdf 7 page image

Part names andfunctionsn Sensor unitBCAn Magnet unitDSensor unit coverM NUsed to confirm the status of thesensor or register the sensor tothe hub.LED indicatorMagnet unit coverLED indicatorYou can press M N and check theLED indicator to confirm the sensor’sstatus.Indicator StatusGreen, lit Window/door is closedRed, lit Window/door is openIndicator StatusRed,blinkingSensor is out of rangeof the hubGreen,blinkingRegistration mode(You pressed and heldM N)Off No battery powerNote:R The LED indicator does not indicatesensor status if the sensor has notbeen registered (page 8).Setup overview1 Initial setupMake sure you can access thesystem using your mobile device.For details, refer to the SystemSetup Guide included with yourhub.2 Insert the batteryThe window/door sensor is batterypowered.3 RegistrationRequired only if the window/doorsensor was purchased separately(i.e., not as part of a bundle).4 Confirm the installation areaRead the information in thisdocument to confirm that thedesired installation area is suitableto proper operation.5 Temporary placementTemporarily place the window/door sensor in the desired locationand confirm that it operatesproperly (page 10).6 InstallationInstall the window/door sensor onthe same position where proper7SetupHNS101AZ_(en_en)_0325_ver.031.pdf 7 2015/03/25 14:20:39