6.1.4 Restarting the PBXIf the PBX does not operate properly, restart the PBX using Web Maintenance Console or switch the powerto OFF then ON. Before restarting the PBX, try the system feature again to confirm whether there definitelyis a problem or not.Note• Restarting the PBX causes the following:– Audio data being recorded– System data being saved– Data being transferred to PBX– Calls on hold are terminated.– Calls on exclusive hold are terminated.– Calls in progress are terminated.– Call park is cleared.Other data stored in memory, except the above, are not cleared.• The data synchronicity cycle for "operation data" that is presently running and "system data" stored inthe system's storage is 30 minutes. For that reason, when restarting the PBX within 30 minutes afteroperation data has been changed, on occasion, the changed operation data will not have been savedin the system data. Please verify the system data after restarting the PBX.OperationFor details about the system reset, refer to "4.3.4 Maintenance—[2-4] System Control—System Reset" inthe Programming Item List.6.1.4 Restarting the PBX110 Getting Started
